English
Home > Products > KP1071QWPA

China KP1071QWPA Manufacturer, Supplier, Factory

We insist on offering high-quality creation with superior business enterprise concept, honest revenue plus the greatest and fast service. it will bring you not only the high quality solution and huge profit, but essentially the most significant is usually to occupy the endless market for KP1071QWPA,KP1070QWPA,KP1072QWAP,Rectifier Bridge Integrated Buck LED Power Switch with External OTP Chip, Therefore, we are able to meet up with different inquiries from different purchasers. Remember to discover our website to check a lot more information from our products.
KP1071QWPA, We have been confident that we're able to provide you with opportunities and is going to be a valuable business partner of you. We look forward to working with you soon. Learn more about the types of items that we work with or contact us now directly with your inquiries. You are welcome to contact us anytime!

Related Products

Hot Products

  • KP116SPA

    KP116SPA

    KP116SPA is a highly integrated constant current LED controller, the chip adopts a quasi-resonant mode of operation, and the active power factor correction control technology can meet the requirements of high power factor, low harmonic distortion and high efficiency.
  • KP18068ESPA

    KP18068ESPA

    KP18068ESPA is a high-precision five channel high voltage LED linear constant current dimming chip, which can be independently set with the I2C (Inter-Integrated-Circuit Bus) interface to adjust the size of five current channels and maintain various dimming modes.
  • KP1315SPA

    KP1315SPA

    The KP1315SPA model supports PWM and 0-10V dimming isolation primary PSR constant current chips, with high dimming accuracy and depth, suitable for applications such as medium and high-power isolated lighting power supplies.
  • KP1511SPA

    KP1511SPA

    KP1511SPA is a highly integrated step-up PFC constant voltage controller, the chip adopts a quasi-resonant mode of operation, coupled with active power factor correction control technology to meet the requirements of high power factor, ultra-low harmonic distortion and high efficiency.
  • AS1631

    AS1631

    The AS1631 is a resonant switching power controller based on a half-bridge LLC resonant converter. The chip integrates high-voltage start, AC power failure detection and X capacitor discharge functions to meet the requirements of fast start and ultra-low standby.
  • NE1180

    NE1180

    The NE1180 is a controller for continuous on-mode (CCM) power factor correction (PFC) step-up preconverters.
  • Related Blog
  • Reviews

  • New grid drive series KP8530X for high reliability motor drive.

    Modern power electronics applications are based on the conversion technology of power devices, and all power devices require suitable gate drive solutions. As a bridge between...

  • DBTR_2591A_01_REV1.0_2023-04-14

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • Smart Meter | One-stop Chip Solution

    We provide diversified integrated chip solutions such as AC-DC, DC-DC, LDO and current limiting switch for smart meter applications to meet the high reliability and high performance requirements of meter applications.

  • The characteristics of ACDC Constant Current Chip

    An AC-DC Constant Current Chip is an integrated circuit designed to provide a stable current output while converting alternating current (AC) input to direct current (DC). These are commonly used in LED drivers and low-power lighting systems.

  • ​How Does Integrated EMI Filter in ACDC Constant Current Chip Simplify Power Supply Design?

    This technological leap demonstrates its advantages in wide-voltage scenarios. When the input voltage jumps from 90V to 264V, Huqin's ACDC chip can dynamically adjust the internal electromagnetic structure to keep the noise attenuation rate consistently above 42dB. However, when the voltage of a certain competing product's DCDC solution undergoes a sudden change, the filtering effect will decline by 15dB. This is like teaching the chip "metamorphosis". Test engineer Xiao Zhang pointed at the spectrum analyzer and said, "Our chip can reconstruct the electromagnetic topology in real time based on the interference frequency. This kind of intelligent response is something that discrete solutions can never catch up with."

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept