English
Home > Products > Rectifier Bridge Integrated Buck LED Power Switch with External OTP Chip

China Rectifier Bridge Integrated Buck LED Power Switch with External OTP Chip Manufacturer, Supplier, Factory

The buyer pleasure is our primary concentrate on. We uphold a consistent level of professionalism, excellent, credibility and service for Rectifier Bridge Integrated Buck LED Power Switch with External OTP Chip,KP1070QWPA,KP1071QWPA,KP1072QWAP, We are ready to cooperate with organization pals from at your home and abroad and make a great long term together.
Rectifier Bridge Integrated Buck LED Power Switch with External OTP Chip, With its rich manufacturing experience, high-quality products, and perfect after-sale service, the company has gained good reputation and has become one of the famous enterprise specialized in manufacturing series.We sincerely hope to establish business relation with you and pursue mutual benefit.

Related Products

Hot Products

  • KP2813ASGA

    KP2813ASGA

    KP2813ASGA is a high power factor, low total harmonic distortion, primary side control flyback constant voltage controller.
  • AS2780

    AS2780

    The AS2780 is a constant voltage output controller with high power factor, low total harmonic distortion, and primary side control.
  • KP86201

    KP86201

    KP86201 is a single-phase induction motor controller based on the direct AC-to-AC converter (DAACTM) architecture, which can realize a single-phase AC motor stepless speed regulation solution with high power density, high efficiency, high power factor and low harmonics.
  • KP15051SPA

    KP15051SPA

    The KP15051SPA series is a high-performance, low-cost PWM controlled power switch for off-line low-power step-down applications with simple peripheral circuits and fewer components.
  • KP1325LGA

    KP1325LGA

    KP1325LGA is a highly integrated constant current LED power controller, the chip adopts the primary feedback quasi-resonant mode, and the active power factor correction control technology can meet the performance requirements of high power factor, low harmonic distortion and high efficiency.
  • KP107XQSPA

    KP107XQSPA

    KP107XQSPA is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications without auxiliary winding.
  • Related Blog
  • Reviews

  • The characteristics of ACDC Constant Current Chip

    An AC-DC Constant Current Chip is an integrated circuit designed to provide a stable current output while converting alternating current (AC) input to direct current (DC). These are commonly used in LED drivers and low-power lighting systems.

  • High Performance 12V/4A Adapter Charger with Offline Current Mode Controller KP201 and Synchronous Rectifier KP40512

    KP201 is a high performance current mode PWM controller for offline flyback converter applications. The IC supports DCM and CCM operation mode.

  • 500W, Single Stage LLC Power Supply Reference Design with KP2591(A)

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • Drain Sensing CrM Boost PFC 100W Demo Board with KP2801A

    This DEMO Board provides 100W CrM Boost PFC Solution. The controller KP2801A enables to drive without auxiliary winding ZCD sensing by Novel Drain sensing tech...

  • ​KP86201: Empowering equipment operation with precise performance

    As a core component focusing on electronic control scenarios, KP86201's core advantages are reflected in control accuracy and operation stability. Adaptation compatibility and energy efficiency optimization are its key characteristics, which can not only meet the precise regulation needs under complex working conditions, but also provide solid support for the efficient operation of equipment. In electric The sub-control field shows a practical value that cannot be ignored.

  • ​How Does Integrated EMI Filter in ACDC Constant Current Chip Simplify Power Supply Design?

    This technological leap demonstrates its advantages in wide-voltage scenarios. When the input voltage jumps from 90V to 264V, Huqin's ACDC chip can dynamically adjust the internal electromagnetic structure to keep the noise attenuation rate consistently above 42dB. However, when the voltage of a certain competing product's DCDC solution undergoes a sudden change, the filtering effect will decline by 15dB. This is like teaching the chip "metamorphosis". Test engineer Xiao Zhang pointed at the spectrum analyzer and said, "Our chip can reconstruct the electromagnetic topology in real time based on the interference frequency. This kind of intelligent response is something that discrete solutions can never catch up with."

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept