English
Home > Products > AC220V to 3.3V Auxiliary Power Supply Circuit Chip

China AC220V to 3.3V Auxiliary Power Supply Circuit Chip Manufacturer, Supplier, Factory

"Quality first, Honesty as base, Sincere service and mutual profit" is our idea, in order to develop continuously and pursue the excellence for AC220V to 3.3V Auxiliary Power Supply Circuit Chip,KP35026VGA,WIFI Module Power Supply Chip,Low-Power Consumption Non-isolated Step-Down BUCK Solution, At present, corporation name has much more than 4000 kinds of products and gained very good status and big shares on current market domestic and abroad.
AC220V to 3.3V Auxiliary Power Supply Circuit Chip, Now we have won a good reputation among overseas and domestic clients. Adhering to the management tenet of "credit oriented, customer first, high efficiency and mature services", we warmly welcome friends from all walks of life to cooperate with us.

Related Products

Hot Products

  • AS8111STA

    AS8111STA

    The AS8111STA is a high-performance quasi-resonant mode non-isolated controller that delivers high precision constant voltage and constant current output performance.
  • KP311ALGA

    KP311ALGA

    The KP311ALGA is a non-isolated, highly integrated, and low-cost PWM power switch for step-down and step-down circuits.
  • AS2780

    AS2780

    The AS2780 is a constant voltage output controller with high power factor, low total harmonic distortion, and primary side control.
  • AS68032

    AS68032

    AS68032 is a high-precision 3-route LED modulation drive, which can independently set the PWM signal duty ratio of 3 channels through 3 PWM interfaces to achieve the dimming and color adjustment function.
  • KP521001

    KP521001

    The KP521001 is a synchronous buck converter that operates over a wide input voltage range from 7V to 100V.
  • KP107XQ

    KP107XQ

    KP107XQ is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications without auxiliary winding.
  • Related Blog
  • Reviews

  • The ultra-compact 40V series of buck converters are used in areas such as smart home appliances.

    With the improvement of consumers' quality of life, networked remote control makes smart home appliances with a "sense of science and technology" halo become a new generation...

  • 500W, Single Stage LLC Power Supply Reference Design with KP2591(A)

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • 50W High Performance LED Filament Lamp Driver with KP1352+GaN FET

    The demo board is designed to demonstrate a highperformance 50WLED filament lamp solution with a full input voltage range. The demonstration board is realized through a highly integrated high-frequency direct drive gallium nitride boost boost PFC constant current controller KP1352, with 650V power GaN FET.

  • The advantages of DCDC Constant Current Chip

    DC-DC constant current chips have been in high demand in recent times, owing to their numerous benefits. These embedded systems are well-equipped to handle a wide range of applications, such as automotive, IoT, medical devices, and telecommunications. In this article, we will discuss some of the significant advantages of DC-DC constant current chips.

  • ​How Does Integrated EMI Filter in ACDC Constant Current Chip Simplify Power Supply Design?

    This technological leap demonstrates its advantages in wide-voltage scenarios. When the input voltage jumps from 90V to 264V, Huqin's ACDC chip can dynamically adjust the internal electromagnetic structure to keep the noise attenuation rate consistently above 42dB. However, when the voltage of a certain competing product's DCDC solution undergoes a sudden change, the filtering effect will decline by 15dB. This is like teaching the chip "metamorphosis". Test engineer Xiao Zhang pointed at the spectrum analyzer and said, "Our chip can reconstruct the electromagnetic topology in real time based on the interference frequency. This kind of intelligent response is something that discrete solutions can never catch up with."

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept