English
Home > Products > 150V Withstand Voltage BUCK Step-Down DCDC Converter

China 150V Withstand Voltage BUCK Step-Down DCDC Converter Manufacturer, Supplier, Factory

For a result of ours specialty and repair consciousness, our business has won a very good name among the clients all around the globe for 150V Withstand Voltage BUCK Step-Down DCDC Converter, Welcome to go to our firm and manufacturing unit. Be sure to really feel free to get in touch with us in the event you need any further more assistance.
150V Withstand Voltage BUCK Step-Down DCDC Converter, Our expert engineering team will generally be prepared to serve you for consultation and feedback. We're able to also give you with free of charge samples to meet your requirements. Best efforts will likely be produced to provide you the best service and merchandise. When you are keen on our business and items, make sure you speak to us by sending us emails or call us quickly. In an effort to know our merchandise and company extra, you may come to our factory to view it. We'll generally welcome guests from all over the world to our business to create business relations with us. Be sure to feel cost-free to speak to us for small business and we believe we are going to share the best trading experience with all our merchants.

Related Products

Hot Products

  • KP1463SPA

    KP1463SPA

    KP1463SPA is a high precision, dimming LED constant current controller suitable for non-isolated step-down LED constant current power supply with a full range of AC input voltage.
  • KP18058ESPA

    KP18058ESPA

    KP18058ESPA is a high-precision five channel all high voltage LED linear constant current dimming chip, which can be independently set with the I2C (Inter Integrated Circuit Bus) interface to adjust the size of five current channels and maintain various dimming modes.
  • KP28163SGA

    KP28163SGA

    KP28163SGA is a single-stage high PFC non isolated buck constant voltage chip. The chip adopts a quasi resonant operating mode and adaptively adjusts the output voltage, which not only meets the voltage requirements of the later stage linear constant current, but also improves system efficiency.
  • KP35026VGA

    KP35026VGA

    The KP35026VGA is a high performance and low cost PWM controlled power switch for 3.3V powered applications with simple peripheral circuits and few components.
  • NDP23A5QB

    NDP23A5QB

    The NDP23A5QB is an efficient, single-chip synchronous buck DC/DC converter with a jitter frequency and average current mode control architecture.
  • KP127XFHSPA

    KP127XFHSPA

    KP127XFHSPA is a family of highly integrated Constant Current LED power switch. The IC utilizes Quasi-Resonant (QR) Buck topology with active PFC control for high PF, low THD, and high efficiency.
  • Related Blog
  • Reviews

  • New grid drive series KP8530X for high reliability motor drive.

    Modern power electronics applications are based on the conversion technology of power devices, and all power devices require suitable gate drive solutions. As a bridge between...

  • Drain Sensing CrM Boost PFC 100W Demo Board with KP2801A

    This DEMO Board provides 100W CrM Boost PFC Solution. The controller KP2801A enables to drive without auxiliary winding ZCD sensing by Novel Drain sensing tech...

  • The advantages of DCDC Constant Current Chip

    DC-DC constant current chips have been in high demand in recent times, owing to their numerous benefits. These embedded systems are well-equipped to handle a wide range of applications, such as automotive, IoT, medical devices, and telecommunications. In this article, we will discuss some of the significant advantages of DC-DC constant current chips.

  • Smart Meter | One-stop Chip Solution

    We provide diversified integrated chip solutions such as AC-DC, DC-DC, LDO and current limiting switch for smart meter applications to meet the high reliability and high performance requirements of meter applications.

  • ​KP86201: Empowering equipment operation with precise performance

    As a core component focusing on electronic control scenarios, KP86201's core advantages are reflected in control accuracy and operation stability. Adaptation compatibility and energy efficiency optimization are its key characteristics, which can not only meet the precise regulation needs under complex working conditions, but also provide solid support for the efficient operation of equipment. In electric The sub-control field shows a practical value that cannot be ignored.

  • What Makes ACDC Constant Current Chips the Core of Modern Power Efficiency?

    In the modern era of electronics, ACDC Constant Current Chips have become indispensable in powering devices that demand stable and efficient energy conversion. These chips act as the essential link between alternating current (AC) input and direct current (DC) output, ensuring that electronic devices receive a constant, regulated current supply regardless of voltage fluctuations. This feature is crucial for maintaining performance stability and extending the lifespan of devices such as LED lighting, power adapters, battery chargers, industrial control systems, and communication equipment.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept