English
Home > Products > KP1272FHSPA

China KP1272FHSPA Manufacturer, Supplier, Factory

We not only will try our greatest to offer superb companies to just about every buyer, but also are ready to receive any suggestion offered by our shoppers for KP1272FHSPA,KP1274FHSPA,Active PFC Buck LED Power Chip, We are going to do our best to fulfill your specifications and are sincerely searching forward to building mutual valuable organization romantic relationship along with you!
KP1272FHSPA, we always keep our credit and mutual benefit to our client, insist our high quality service to moving our clients. always welcome the our friends and clients to come and visit our company and guid our business, if you are interested in our goods, you can also submit your purchase information online, and we'll contact you immediately, we keep our highly sincere cooperation and wish everything in your side are all well.

Related Products

Hot Products

  • KP28123SGA

    KP28123SGA

    KP28123SGA is a single-stage high PFC non isolated constant voltage BUCK power chip. The chip adopts a quasi resonant operating mode and adaptively adjusts the output voltage, which not only meets the voltage requirements of the later stage linear constant current, but also improves system efficiency.
  • KP201LGA

    KP201LGA

    The KP201LGA is a high-performance PWM controller designed for off-line flyback power supplies.
  • NE1180

    NE1180

    The NE1180 is a controller for continuous on-mode (CCM) power factor correction (PFC) step-up preconverters.
  • KP86201

    KP86201

    KP86201 is a single-phase induction motor controller based on the direct AC-to-AC converter (DAACTM) architecture, which can realize a single-phase AC motor stepless speed regulation solution with high power density, high efficiency, high power factor and low harmonics.
  • KP1079XWPA

    KP1079XWPA

    KP1079XWPA is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications without auxiliary winding.
  • KP10760WPA

    KP10760WPA

    KP10760WPA combines a 500V power MOSFET, 600V FRD, 800V Rectifier Bridge and high voltage startup/IC supply circuit in one chip which reduced system design cost.
  • Related Blog
  • Reviews

  • PFC+LLC Composite controller.

    ​For high power density, high power output fast charge needs, Sillij launched a high-performance PFC+LLC combination controller SY5055, which sealed the front BOOST PFC and the rear LLC controller, making the peripheral circuit more concise, saving costs and also conducive to improving the power density of the entire power solution.

  • New grid drive series KP8530X for high reliability motor drive.

    Modern power electronics applications are based on the conversion technology of power devices, and all power devices require suitable gate drive solutions. As a bridge between...

  • The ultra-compact 40V series of buck converters are used in areas such as smart home appliances.

    With the improvement of consumers' quality of life, networked remote control makes smart home appliances with a "sense of science and technology" halo become a new generation...

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • High Performance 12V/4A Adapter Charger with Offline Current Mode Controller KP201 and Synchronous Rectifier KP40512

    KP201 is a high performance current mode PWM controller for offline flyback converter applications. The IC supports DCM and CCM operation mode.

  • ​How Does Integrated EMI Filter in ACDC Constant Current Chip Simplify Power Supply Design?

    This technological leap demonstrates its advantages in wide-voltage scenarios. When the input voltage jumps from 90V to 264V, Huqin's ACDC chip can dynamically adjust the internal electromagnetic structure to keep the noise attenuation rate consistently above 42dB. However, when the voltage of a certain competing product's DCDC solution undergoes a sudden change, the filtering effect will decline by 15dB. This is like teaching the chip "metamorphosis". Test engineer Xiao Zhang pointed at the spectrum analyzer and said, "Our chip can reconstruct the electromagnetic topology in real time based on the interference frequency. This kind of intelligent response is something that discrete solutions can never catch up with."

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept