English
Home > Products > Integrated PFC Boost Constant Current LED Driver Chip

China Integrated PFC Boost Constant Current LED Driver Chip Manufacturer, Supplier, Factory

We're convinced that with joint initiatives, the business between us will bring us mutual benefits. We can easily guarantee you merchandise good quality and competitive rate for Integrated PFC Boost Constant Current LED Driver Chip,KP116SPA, President of our company, with whole staff, welcomes all buyers to visit our company and inspect. Let us cooperate hand in hand to make a good future.
Integrated PFC Boost Constant Current LED Driver Chip, Our company always concentrate on the development of the international market. We've got a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.

Related Products

Hot Products

  • KP116SPA

    KP116SPA

    KP116SPA is a highly integrated constant current LED controller, the chip adopts a quasi-resonant mode of operation, and the active power factor correction control technology can meet the requirements of high power factor, low harmonic distortion and high efficiency.
  • KP18058ESPA

    KP18058ESPA

    KP18058ESPA is a high-precision five channel all high voltage LED linear constant current dimming chip, which can be independently set with the I2C (Inter Integrated Circuit Bus) interface to adjust the size of five current channels and maintain various dimming modes.
  • KP1402ASSGA

    KP1402ASSGA

    KP1402ASSGA is a 0-10V analog dimming signal to PWM digital signal chip. The chip can detect different dimming input signals (including 0/1-10V, 10-0/1V, 0/1-5V, 5-0/1V voltage dimming signals, PWM signals with 0-100% duty cycle, and simple resistance dimming signals), and convert the input signals into corresponding duty cycle PWM signals to adjust the output current of the LED driver.
  • KP3111LGA

    KP3111LGA

    The KP3111LGA is a non-isolated, highly integrated, and low-cost PWM power switch for step-down and step-down circuits.
  • AS6A31N

    AS6A31N

    The AS6A31N is a two-phase Interleaved, critical on-mode Boost (CRM Boost) constant voltage power factor correction (PFC) controller.
  • NDP23A5QB

    NDP23A5QB

    The NDP23A5QB is an efficient, single-chip synchronous buck DC/DC converter with a jitter frequency and average current mode control architecture.
  • Related Blog
  • Reviews

  • The ultra-compact 40V series of buck converters are used in areas such as smart home appliances.

    With the improvement of consumers' quality of life, networked remote control makes smart home appliances with a "sense of science and technology" halo become a new generation...

  • Drain Sensing CrM Boost PFC 100W Demo Board with KP2801A

    This DEMO Board provides 100W CrM Boost PFC Solution. The controller KP2801A enables to drive without auxiliary winding ZCD sensing by Novel Drain sensing tech...

  • 500W, Single Stage LLC Power Supply Reference Design with KP2591(A)

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • DBTR_2591A_01_REV1.0_2023-04-14

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • What Makes ACDC Constant Current Chips the Core of Modern Power Efficiency?

    In the modern era of electronics, ACDC Constant Current Chips have become indispensable in powering devices that demand stable and efficient energy conversion. These chips act as the essential link between alternating current (AC) input and direct current (DC) output, ensuring that electronic devices receive a constant, regulated current supply regardless of voltage fluctuations. This feature is crucial for maintaining performance stability and extending the lifespan of devices such as LED lighting, power adapters, battery chargers, industrial control systems, and communication equipment.

  • How Does a DCDC Constant Current Chip Work in High-Precision Power Regulation?

    A DCDC Constant Current Chip is a core component in modern power management systems, designed to deliver a stable and controllable output current regardless of load or input voltage variations. This article provides a comprehensive technical overview of how DCDC Constant Current Chips function, examines key electrical parameters, explores real-world application scenarios, and answers frequently asked technical questions. The content is structured to support engineering decision-making, component selection, and long-term system optimization while aligning with current search behavior and professional reading habits.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept