English
Home > Products > 24V Isolated DCDC Power Module Solution

China 24V Isolated DCDC Power Module Solution Manufacturer, Supplier, Factory

Getting buyer gratification is our company's purpose endlessly. We will make good attempts to produce new and top-quality products, meet up with your specific requirements and provide you with pre-sale, on-sale and after-sale expert services for 24V Isolated DCDC Power Module Solution,Compact Isolated DCDC Module, We never stop improving our technique and high quality to maintain up with the enhancement trend of this industry and fulfill your pleasure effectively. For anyone who is fascinated within our solutions, you should get in touch with us freely.
24V Isolated DCDC Power Module Solution, We set a strict quality control system. We have now return and exchange policy, and you can exchange within 7 days after receive the wigs if it is in new station and we service repairing free for our solutions. Please feel free to contact us for further information and we will offer you competitive price list then.

Related Products

Hot Products

  • KP14622SPA

    KP14622SPA

    KP14622SPA is a PF>0.9 high precision, dimming type LED constant current driver control chip. Non-isolated step-down LED constant current power supply for a full range of AC input voltages.
  • KP2806LGA

    KP2806LGA

    The KP2806LGA is a high-performance, quasi-resonant (QR) Boost type (Boost) constant voltage power factor correction (PFC) controller.
  • KP3310

    KP3310

    The KP3310 is an off-line linear regulator with a compact inductance free design. By adjusting the SEL pin resistance, the KP3310 can obtain a 5V/3.3V/2.7V three-gear output voltage.
  • AS29011

    AS29011

    The AS29011 is a SOT89-5 package ultra-high voltage linear regulator capable of withstanding continuous DC or transient input voltages of up to 85V.
  • KP1075XWPA

    KP1075XWPA

    KP1075XWPA is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications without auxiliary winding.
  • KP119X

    KP119X

    KP119X is a family of highly integrated power switch with DCM (Discontinuous Conduction Mode) Primary Side Regulation (PSR) constant current (CC) control for high power isolated LED lighting applications.
  • Related Blog
  • Reviews

  • PFC+LLC Composite controller.

    ​For high power density, high power output fast charge needs, Sillij launched a high-performance PFC+LLC combination controller SY5055, which sealed the front BOOST PFC and the rear LLC controller, making the peripheral circuit more concise, saving costs and also conducive to improving the power density of the entire power solution.

  • Drain Sensing CrM Boost PFC 100W Demo Board with KP2801A

    This DEMO Board provides 100W CrM Boost PFC Solution. The controller KP2801A enables to drive without auxiliary winding ZCD sensing by Novel Drain sensing tech...

  • DBTR_2591A_01_REV1.0_2023-04-14

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • High Performance 12V/4A Adapter Charger with Offline Current Mode Controller KP201 and Synchronous Rectifier KP40512

    KP201 is a high performance current mode PWM controller for offline flyback converter applications. The IC supports DCM and CCM operation mode.

  • ​How Does Integrated EMI Filter in ACDC Constant Current Chip Simplify Power Supply Design?

    This technological leap demonstrates its advantages in wide-voltage scenarios. When the input voltage jumps from 90V to 264V, Huqin's ACDC chip can dynamically adjust the internal electromagnetic structure to keep the noise attenuation rate consistently above 42dB. However, when the voltage of a certain competing product's DCDC solution undergoes a sudden change, the filtering effect will decline by 15dB. This is like teaching the chip "metamorphosis". Test engineer Xiao Zhang pointed at the spectrum analyzer and said, "Our chip can reconstruct the electromagnetic topology in real time based on the interference frequency. This kind of intelligent response is something that discrete solutions can never catch up with."

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept