English
Home > Products > PWM Dimming DC-to-DC Constant Current Power Supply Chip

China PWM Dimming DC-to-DC Constant Current Power Supply Chip Manufacturer, Supplier, Factory

Our pursuit and company goal is to "Always satisfy our customer requirements". We continue to develop and design superior quality products for both our old and new customers and achieve a win-win prospect for our clients as well as us for PWM Dimming DC-to-DC Constant Current Power Supply Chip,Low-Power Constant Current DC-to-DC,DC-to-DC Constant Current Chip without Flicker for Dimming, For more information and facts, you should never wait to make contact with us. All inquiries from you may be highly appreciated.
PWM Dimming DC-to-DC Constant Current Power Supply Chip, In order to carry out our goal of "customer first and mutual benefit" in the cooperation, we establish a expert engineering team and a sales team to supply the best service to satisfy our customers' requirements. Welcome you to cooperate with us and join us. We are your best choice.

Related Products

Hot Products

  • KP1325LGA

    KP1325LGA

    KP1325LGA is a highly integrated constant current LED power controller, the chip adopts the primary feedback quasi-resonant mode, and the active power factor correction control technology can meet the performance requirements of high power factor, low harmonic distortion and high efficiency.
  • KP3111LGA

    KP3111LGA

    The KP3111LGA is a non-isolated, highly integrated, and low-cost PWM power switch for step-down and step-down circuits.
  • AS6A31N

    AS6A31N

    The AS6A31N is a two-phase Interleaved, critical on-mode Boost (CRM Boost) constant voltage power factor correction (PFC) controller.
  • NE1180

    NE1180

    The NE1180 is a controller for continuous on-mode (CCM) power factor correction (PFC) step-up preconverters.
  • KP126XFCSPA

    KP126XFCSPA

    KP126XFCSPA is a family of highly integrated Constant Current LED power switch. The IC utilizes Quasi-Resonant (QR) Buck topology with active PFC control for high PF, low THD, and high efficiency.
  • KP10760WPA

    KP10760WPA

    KP10760WPA combines a 500V power MOSFET, 600V FRD, 800V Rectifier Bridge and high voltage startup/IC supply circuit in one chip which reduced system design cost.
  • Related Blog
  • Reviews

  • PFC+LLC Composite controller.

    ​For high power density, high power output fast charge needs, Sillij launched a high-performance PFC+LLC combination controller SY5055, which sealed the front BOOST PFC and the rear LLC controller, making the peripheral circuit more concise, saving costs and also conducive to improving the power density of the entire power solution.

  • New grid drive series KP8530X for high reliability motor drive.

    Modern power electronics applications are based on the conversion technology of power devices, and all power devices require suitable gate drive solutions. As a bridge between...

  • 500W, Single Stage LLC Power Supply Reference Design with KP2591(A)

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • DBTR_2591A_01_REV1.0_2023-04-14

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • The advantages of DCDC Constant Current Chip

    DC-DC constant current chips have been in high demand in recent times, owing to their numerous benefits. These embedded systems are well-equipped to handle a wide range of applications, such as automotive, IoT, medical devices, and telecommunications. In this article, we will discuss some of the significant advantages of DC-DC constant current chips.

  • ​How Does Integrated EMI Filter in ACDC Constant Current Chip Simplify Power Supply Design?

    This technological leap demonstrates its advantages in wide-voltage scenarios. When the input voltage jumps from 90V to 264V, Huqin's ACDC chip can dynamically adjust the internal electromagnetic structure to keep the noise attenuation rate consistently above 42dB. However, when the voltage of a certain competing product's DCDC solution undergoes a sudden change, the filtering effect will decline by 15dB. This is like teaching the chip "metamorphosis". Test engineer Xiao Zhang pointed at the spectrum analyzer and said, "Our chip can reconstruct the electromagnetic topology in real time based on the interference frequency. This kind of intelligent response is something that discrete solutions can never catch up with."

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept