English
Home > Products > KP15051SPA

China KP15051SPA Manufacturer, Supplier, Factory

We always think and practice corresponding to the change of circumstance, and grow up. We goal at the achievement of a richer mind and body and also the living for KP15051SPA,Simplified 12V Auxiliary Power Supply Circuit,Simplified Low-Cost BUCK Power Supply Chip,AC220V to 12V Non-isolated BUCK Chip, Make sure you sense absolutely absolutely free to speak to us for organization. nd we believe we are going to share the ideal trading practical experience with all our merchants.
KP15051SPA, we're now looking forward to even greater cooperation with overseas customers based on mutual benefits. We'll work wholeheartedly to improve our merchandise and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.

Related Products

Hot Products

  • KP18058ESPA

    KP18058ESPA

    KP18058ESPA is a high-precision five channel all high voltage LED linear constant current dimming chip, which can be independently set with the I2C (Inter Integrated Circuit Bus) interface to adjust the size of five current channels and maintain various dimming modes.
  • KP18068ESPA

    KP18068ESPA

    KP18068ESPA is a high-precision five channel high voltage LED linear constant current dimming chip, which can be independently set with the I2C (Inter-Integrated-Circuit Bus) interface to adjust the size of five current channels and maintain various dimming modes.
  • AS2561

    AS2561

    The AS2561 is a high-performance, quasi-resonant (QR) Boost type (Boost) constant voltage power factor correction (PFC) controller.
  • AS8211HV

    AS8211HV

    The AS8211HV is a high-performance, low-cost PWM controlled power switch suitable for off-line low-power step-down applications with simple peripheral circuits and fewer devices.
  • KP1076X

    KP1076X

    KP1076X is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications without auxiliary winding.
  • KP1313XDP

    KP1313XDP

    KP1313XDP is a high efficiency Quasi-Resonant (QR) mode Primary Side Regulation (PSR) LED power switch with high precision CC control ideal for high power LED lighting applications.
  • Related Blog
  • Reviews

  • Drain Sensing CrM Boost PFC 100W Demo Board with KP2801A

    This DEMO Board provides 100W CrM Boost PFC Solution. The controller KP2801A enables to drive without auxiliary winding ZCD sensing by Novel Drain sensing tech...

  • 500W, Single Stage LLC Power Supply Reference Design with KP2591(A)

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • 50W High Performance LED Filament Lamp Driver with KP1352+GaN FET

    The demo board is designed to demonstrate a highperformance 50WLED filament lamp solution with a full input voltage range. The demonstration board is realized through a highly integrated high-frequency direct drive gallium nitride boost boost PFC constant current controller KP1352, with 650V power GaN FET.

  • The characteristics of ACDC Constant Current Chip

    An AC-DC Constant Current Chip is an integrated circuit designed to provide a stable current output while converting alternating current (AC) input to direct current (DC). These are commonly used in LED drivers and low-power lighting systems.

  • ​How Does Integrated EMI Filter in ACDC Constant Current Chip Simplify Power Supply Design?

    This technological leap demonstrates its advantages in wide-voltage scenarios. When the input voltage jumps from 90V to 264V, Huqin's ACDC chip can dynamically adjust the internal electromagnetic structure to keep the noise attenuation rate consistently above 42dB. However, when the voltage of a certain competing product's DCDC solution undergoes a sudden change, the filtering effect will decline by 15dB. This is like teaching the chip "metamorphosis". Test engineer Xiao Zhang pointed at the spectrum analyzer and said, "Our chip can reconstruct the electromagnetic topology in real time based on the interference frequency. This kind of intelligent response is something that discrete solutions can never catch up with."

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept