English
Home > Products > Interleaved PFC Chip

China Interleaved PFC Chip Manufacturer, Supplier, Factory

Assume full accountability to fulfill all demands of our purchasers; attain continual advancements by marketing the advancement of our clientele; grow to be the final permanent cooperative partner of purchasers and maximize the interests of purchasers for Interleaved PFC Chip,Dual-Tube PFC Chip,Alternative to NCP1631 Power Supply Chip, Because we stay with this line about 10 years. We got most effective suppliers support on excellent and cost. And we had weed out suppliers with poor high quality. Now several OEM factories cooperated with us too.
Interleaved PFC Chip, Our products are widely recognized and trusted by users and can meet continuously changing of economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!

Related Products

Hot Products

  • AS8211HV

    AS8211HV

    The AS8211HV is a high-performance, low-cost PWM controlled power switch suitable for off-line low-power step-down applications with simple peripheral circuits and fewer devices.
  • KP1463SPA

    KP1463SPA

    KP1463SPA is a high precision, dimming LED constant current controller suitable for non-isolated step-down LED constant current power supply with a full range of AC input voltage.
  • AS64194

    AS64194

    AS64194 is a step-down LED constant current power switch suitable for low voltage DC input, deep dimming, suitable for step-down high-power dimming LED driver applications with input 20V ~ 80V.
  • KP3310

    KP3310

    The KP3310 is an off-line linear regulator with a compact inductance free design. By adjusting the SEL pin resistance, the KP3310 can obtain a 5V/3.3V/2.7V three-gear output voltage.
  • KP1070QWPA

    KP1070QWPA

    KP1070QWPA is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications without auxiliary winding.
  • KP107XQSPA

    KP107XQSPA

    KP107XQSPA is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications without auxiliary winding.
  • Related Blog
  • Reviews

  • Drain Sensing CrM Boost PFC 100W Demo Board with KP2801A

    This DEMO Board provides 100W CrM Boost PFC Solution. The controller KP2801A enables to drive without auxiliary winding ZCD sensing by Novel Drain sensing tech...

  • New grid drive series KP8530X for high reliability motor drive.

    Modern power electronics applications are based on the conversion technology of power devices, and all power devices require suitable gate drive solutions. As a bridge between...

  • ​KP86201: Empowering equipment operation with precise performance

    As a core component focusing on electronic control scenarios, KP86201's core advantages are reflected in control accuracy and operation stability. Adaptation compatibility and energy efficiency optimization are its key characteristics, which can not only meet the precise regulation needs under complex working conditions, but also provide solid support for the efficient operation of equipment. In electric The sub-control field shows a practical value that cannot be ignored.

  • PFC+LLC Composite controller.

    ​For high power density, high power output fast charge needs, Sillij launched a high-performance PFC+LLC combination controller SY5055, which sealed the front BOOST PFC and the rear LLC controller, making the peripheral circuit more concise, saving costs and also conducive to improving the power density of the entire power solution.

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • 50W High Performance LED Filament Lamp Driver with KP1352+GaN FET

    The demo board is designed to demonstrate a highperformance 50WLED filament lamp solution with a full input voltage range. The demonstration board is realized through a highly integrated high-frequency direct drive gallium nitride boost boost PFC constant current controller KP1352, with 650V power GaN FET.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept