English
Home > Products > Dual-Tube PFC Chip

China Dual-Tube PFC Chip Manufacturer, Supplier, Factory

Our progress depends on the highly developed products ,great talents and repeatedly strengthened technology forces for Dual-Tube PFC Chip,Interleaved PFC Chip,Alternative to NCP1631 Power Supply Chip, We warmly welcome pals from all walks of lifetime to hunt mutual cooperation and generate a far more outstanding and splendid tomorrow.
Dual-Tube PFC Chip, We adopted technique and quality system management, based on ""customer orientated, reputation first, mutual benefit, develop with joint efforts"", welcome friends to communicate and cooperate from all over the world.

Related Products

Hot Products

  • KP106SPA

    KP106SPA

    KP106SPA is a highly integrated constant current LED controller, the chip adopts a quasi-resonant mode of operation, while using active power factor correction control technology to meet the requirements of high power factor, low harmonic distortion and high efficiency.
  • KP1463SPA

    KP1463SPA

    KP1463SPA is a high precision, dimming LED constant current controller suitable for non-isolated step-down LED constant current power supply with a full range of AC input voltage.
  • KP1402ASSGA

    KP1402ASSGA

    KP1402ASSGA is a 0-10V analog dimming signal to PWM digital signal chip. The chip can detect different dimming input signals (including 0/1-10V, 10-0/1V, 0/1-5V, 5-0/1V voltage dimming signals, PWM signals with 0-100% duty cycle, and simple resistance dimming signals), and convert the input signals into corresponding duty cycle PWM signals to adjust the output current of the LED driver.
  • KP35026VGA

    KP35026VGA

    The KP35026VGA is a high performance and low cost PWM controlled power switch for 3.3V powered applications with simple peripheral circuits and few components.
  • CW1131

    CW1131

    CW1131 is a SOT23-3 packaged three pin non isolated BUCK fixed 5V output power chip, high integration and low-cost PWM power switch, suitable for buck and buck circuits.
  • KP10760WPA

    KP10760WPA

    KP10760WPA combines a 500V power MOSFET, 600V FRD, 800V Rectifier Bridge and high voltage startup/IC supply circuit in one chip which reduced system design cost.
  • Related Blog
  • Reviews

  • New grid drive series KP8530X for high reliability motor drive.

    Modern power electronics applications are based on the conversion technology of power devices, and all power devices require suitable gate drive solutions. As a bridge between...

  • The ultra-compact 40V series of buck converters are used in areas such as smart home appliances.

    With the improvement of consumers' quality of life, networked remote control makes smart home appliances with a "sense of science and technology" halo become a new generation...

  • 500W, Single Stage LLC Power Supply Reference Design with KP2591(A)

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 50W High Performance LED Filament Lamp Driver with KP1352+GaN FET

    The demo board is designed to demonstrate a highperformance 50WLED filament lamp solution with a full input voltage range. The demonstration board is realized through a highly integrated high-frequency direct drive gallium nitride boost boost PFC constant current controller KP1352, with 650V power GaN FET.

  • ​How Does Integrated EMI Filter in ACDC Constant Current Chip Simplify Power Supply Design?

    This technological leap demonstrates its advantages in wide-voltage scenarios. When the input voltage jumps from 90V to 264V, Huqin's ACDC chip can dynamically adjust the internal electromagnetic structure to keep the noise attenuation rate consistently above 42dB. However, when the voltage of a certain competing product's DCDC solution undergoes a sudden change, the filtering effect will decline by 15dB. This is like teaching the chip "metamorphosis". Test engineer Xiao Zhang pointed at the spectrum analyzer and said, "Our chip can reconstruct the electromagnetic topology in real time based on the interference frequency. This kind of intelligent response is something that discrete solutions can never catch up with."

  • How Does a DCDC Constant Current Chip Work in High-Precision Power Regulation?

    A DCDC Constant Current Chip is a core component in modern power management systems, designed to deliver a stable and controllable output current regardless of load or input voltage variations. This article provides a comprehensive technical overview of how DCDC Constant Current Chips function, examines key electrical parameters, explores real-world application scenarios, and answers frequently asked technical questions. The content is structured to support engineering decision-making, component selection, and long-term system optimization while aligning with current search behavior and professional reading habits.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept