English
Home > Products > External MOS Step-Down BUCK Chip

China External MOS Step-Down BUCK Chip Manufacturer, Supplier, Factory

As for aggressive selling prices, we believe that you will be searching far and wide for anything that can beat us. We are able to state with absolute certainty that for such good quality at such costs we've been the lowest around for External MOS Step-Down BUCK Chip,AS8111STA,High-Power Step-Down BUCK Constant Voltage Power Supply Solution,High-Power Non-isolated Constant Voltage Power Supply Solution, You would not have any communication problem with us. We sincerely welcome prospects all around the globe to call us for business enterprise cooperation.
External MOS Step-Down BUCK Chip, Honest to every customers are our requested! First-class serve, best quality, best price and fastest delivery date is our advantage! Give every customers good serve is our tenet! This makes our company get the favour of customers and support! Welcome all over the world customers send us enquiry and looking forward your good co-operation !You should your inquiry for more details or request for dealership in selected regions.

Related Products

Hot Products

  • KP116SPA

    KP116SPA

    KP116SPA is a highly integrated constant current LED controller, the chip adopts a quasi-resonant mode of operation, and the active power factor correction control technology can meet the requirements of high power factor, low harmonic distortion and high efficiency.
  • KP14622SPA

    KP14622SPA

    KP14622SPA is a PF>0.9 high precision, dimming type LED constant current driver control chip. Non-isolated step-down LED constant current power supply for a full range of AC input voltages.
  • KP18068ESPA

    KP18068ESPA

    KP18068ESPA is a high-precision five channel high voltage LED linear constant current dimming chip, which can be independently set with the I2C (Inter-Integrated-Circuit Bus) interface to adjust the size of five current channels and maintain various dimming modes.
  • KP2801SGA

    KP2801SGA

    The KP2801SGA is a high-performance, quasi-resonant (QR) Boost type (Boost) constant voltage power factor correction (PFC) controller.
  • CW1131

    CW1131

    CW1131 is a SOT23-3 packaged three pin non isolated BUCK fixed 5V output power chip, high integration and low-cost PWM power switch, suitable for buck and buck circuits.
  • AS5026

    AS5026

    The AS5026 optimizes all functions of the current mode controller with active clamp reset technology.
  • Related Blog
  • Reviews

  • PFC+LLC Composite controller.

    ​For high power density, high power output fast charge needs, Sillij launched a high-performance PFC+LLC combination controller SY5055, which sealed the front BOOST PFC and the rear LLC controller, making the peripheral circuit more concise, saving costs and also conducive to improving the power density of the entire power solution.

  • New grid drive series KP8530X for high reliability motor drive.

    Modern power electronics applications are based on the conversion technology of power devices, and all power devices require suitable gate drive solutions. As a bridge between...

  • The ultra-compact 40V series of buck converters are used in areas such as smart home appliances.

    With the improvement of consumers' quality of life, networked remote control makes smart home appliances with a "sense of science and technology" halo become a new generation...

  • DBTR_2591A_01_REV1.0_2023-04-14

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • The characteristics of ACDC Constant Current Chip

    An AC-DC Constant Current Chip is an integrated circuit designed to provide a stable current output while converting alternating current (AC) input to direct current (DC). These are commonly used in LED drivers and low-power lighting systems.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept