English
Home > Products > Non-isolated LED Power Chip

China Non-isolated LED Power Chip Manufacturer, Supplier, Factory

We have been commitment to supply the competitive price ,excellent products and solutions high-quality, at the same time as fast delivery for Non-isolated LED Power Chip,KP1054AVPA, We sincerely hope to determine some satisfactory interactions along with you from the in the vicinity of long run. We're going to hold you informed of our progress and anticipate building steady company relations along with you.
Non-isolated LED Power Chip, We have now established long-term, stable and good business relationships with many manufacturers and wholesalers around the world. Currently, we are looking forward to even greater cooperation with overseas customers based on mutual benefits. Make sure you feel free to contact us for more details.

Related Products

Hot Products

  • KP14622SPA

    KP14622SPA

    KP14622SPA is a PF>0.9 high precision, dimming type LED constant current driver control chip. Non-isolated step-down LED constant current power supply for a full range of AC input voltages.
  • KP18108ESPA

    KP18108ESPA

    KP18108ESPA is a high PF, high-efficiency linear constant current LED driver chip that uses linear constant current technology to accurately set the LED string current through external resistors.
  • KP28163SGA

    KP28163SGA

    KP28163SGA is a single-stage high PFC non isolated buck constant voltage chip. The chip adopts a quasi resonant operating mode and adaptively adjusts the output voltage, which not only meets the voltage requirements of the later stage linear constant current, but also improves system efficiency.
  • KP35026VGA

    KP35026VGA

    The KP35026VGA is a high performance and low cost PWM controlled power switch for 3.3V powered applications with simple peripheral circuits and few components.
  • NE1180

    NE1180

    The NE1180 is a controller for continuous on-mode (CCM) power factor correction (PFC) step-up preconverters.
  • KP127XFHSPA

    KP127XFHSPA

    KP127XFHSPA is a family of highly integrated Constant Current LED power switch. The IC utilizes Quasi-Resonant (QR) Buck topology with active PFC control for high PF, low THD, and high efficiency.
  • Related Blog
  • Reviews

  • Drain Sensing CrM Boost PFC 100W Demo Board with KP2801A

    This DEMO Board provides 100W CrM Boost PFC Solution. The controller KP2801A enables to drive without auxiliary winding ZCD sensing by Novel Drain sensing tech...

  • DBTR_2591A_01_REV1.0_2023-04-14

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • 50W High Performance LED Filament Lamp Driver with KP1352+GaN FET

    The demo board is designed to demonstrate a highperformance 50WLED filament lamp solution with a full input voltage range. The demonstration board is realized through a highly integrated high-frequency direct drive gallium nitride boost boost PFC constant current controller KP1352, with 650V power GaN FET.

  • Smart Meter | One-stop Chip Solution

    We provide diversified integrated chip solutions such as AC-DC, DC-DC, LDO and current limiting switch for smart meter applications to meet the high reliability and high performance requirements of meter applications.

  • ​KP86201: Empowering equipment operation with precise performance

    As a core component focusing on electronic control scenarios, KP86201's core advantages are reflected in control accuracy and operation stability. Adaptation compatibility and energy efficiency optimization are its key characteristics, which can not only meet the precise regulation needs under complex working conditions, but also provide solid support for the efficient operation of equipment. In electric The sub-control field shows a practical value that cannot be ignored.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept