English
Home > Products > KP15052SPA

China KP15052SPA Manufacturer, Supplier, Factory

Our primary goal is to offer our clients a serious and responsible business relationship, providing personalized attention to all of them for KP15052SPA,AC220V to 12V Non-isolated BUCK Chip,Simplified 5V Auxiliary Power Supply Circuit,Simplified Low-Cost BUCK Power Supply Chip, Safety by innovation is our promise to each other.
KP15052SPA, Our solutions are widely recognized and trusted by users and can meet continuously changing of economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!

Related Products

Hot Products

  • KP18068ESPA

    KP18068ESPA

    KP18068ESPA is a high-precision five channel high voltage LED linear constant current dimming chip, which can be independently set with the I2C (Inter-Integrated-Circuit Bus) interface to adjust the size of five current channels and maintain various dimming modes.
  • KP1313XDP

    KP1313XDP

    KP1313XDP is a high efficiency Quasi-Resonant (QR) mode Primary Side Regulation (PSR) LED power switch with high precision CC control ideal for high power LED lighting applications.
  • CW1131

    CW1131

    CW1131 is a SOT23-3 packaged three pin non isolated BUCK fixed 5V output power chip, high integration and low-cost PWM power switch, suitable for buck and buck circuits.
  • KP86201

    KP86201

    KP86201 is a single-phase induction motor controller based on the direct AC-to-AC converter (DAACTM) architecture, which can realize a single-phase AC motor stepless speed regulation solution with high power density, high efficiency, high power factor and low harmonics.
  • KP1325LGA

    KP1325LGA

    KP1325LGA is a highly integrated constant current LED power controller, the chip adopts the primary feedback quasi-resonant mode, and the active power factor correction control technology can meet the performance requirements of high power factor, low harmonic distortion and high efficiency.
  • KP126XFCSPA

    KP126XFCSPA

    KP126XFCSPA is a family of highly integrated Constant Current LED power switch. The IC utilizes Quasi-Resonant (QR) Buck topology with active PFC control for high PF, low THD, and high efficiency.
  • Related Blog
  • Reviews

  • DBTR_2591A_01_REV1.0_2023-04-14

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • PFC+LLC Composite controller.

    ​For high power density, high power output fast charge needs, Sillij launched a high-performance PFC+LLC combination controller SY5055, which sealed the front BOOST PFC and the rear LLC controller, making the peripheral circuit more concise, saving costs and also conducive to improving the power density of the entire power solution.

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • Drain Sensing CrM Boost PFC 100W Demo Board with KP2801A

    This DEMO Board provides 100W CrM Boost PFC Solution. The controller KP2801A enables to drive without auxiliary winding ZCD sensing by Novel Drain sensing tech...

  • The characteristics of ACDC Constant Current Chip

    An AC-DC Constant Current Chip is an integrated circuit designed to provide a stable current output while converting alternating current (AC) input to direct current (DC). These are commonly used in LED drivers and low-power lighting systems.

  • 50W High Performance LED Filament Lamp Driver with KP1352+GaN FET

    The demo board is designed to demonstrate a highperformance 50WLED filament lamp solution with a full input voltage range. The demonstration board is realized through a highly integrated high-frequency direct drive gallium nitride boost boost PFC constant current controller KP1352, with 650V power GaN FET.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept