English
Home > Products > KP1402ASSGA

China KP1402ASSGA Manufacturer, Supplier, Factory

continue on to improve, to be sure product or service high quality in line with market and consumer standard prerequisites. Our firm has a high-quality assurance program are established for KP1402ASSGA,Analog Signal to PWM Signal Conversion Chip, We sincerely welcome domestic and foreign retailers who calls, letters inquiring, or to crops to barter, we'll supply you high-quality merchandise as well as the most enthusiastic company,We look forward in your go to and your cooperation.
KP1402ASSGA, Our company promises: reasonable prices, short production time and satisfactory after-sales service, we also welcome you to visit our factory at any time you want. Wish we have a pleasant and long terms business together!!!

Related Products

Hot Products

  • KP2801SGA

    KP2801SGA

    The KP2801SGA is a high-performance, quasi-resonant (QR) Boost type (Boost) constant voltage power factor correction (PFC) controller.
  • KP15052SPA

    KP15052SPA

    The KP15052SPA series is a high-performance, low-cost PWM controlled power switch for off-line low-power step-down applications with simple peripheral circuits and fewer components.
  • AS64194

    AS64194

    AS64194 is a step-down LED constant current power switch suitable for low voltage DC input, deep dimming, suitable for step-down high-power dimming LED driver applications with input 20V ~ 80V.
  • NDP36501

    NDP36501

    The NDP36501 is an efficient step-down controller. With a wide input operating voltage range of 6V to 60V, it uses Continuous current mode (CCM) to power high-brightness leds.
  • KP107XQ

    KP107XQ

    KP107XQ is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications without auxiliary winding.
  • KP1076X

    KP1076X

    KP1076X is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications without auxiliary winding.
  • Related Blog
  • Reviews

  • The ultra-compact 40V series of buck converters are used in areas such as smart home appliances.

    With the improvement of consumers' quality of life, networked remote control makes smart home appliances with a "sense of science and technology" halo become a new generation...

  • 500W, Single Stage LLC Power Supply Reference Design with KP2591(A)

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • Smart Meter | One-stop Chip Solution

    We provide diversified integrated chip solutions such as AC-DC, DC-DC, LDO and current limiting switch for smart meter applications to meet the high reliability and high performance requirements of meter applications.

  • ​KP86201: Empowering equipment operation with precise performance

    As a core component focusing on electronic control scenarios, KP86201's core advantages are reflected in control accuracy and operation stability. Adaptation compatibility and energy efficiency optimization are its key characteristics, which can not only meet the precise regulation needs under complex working conditions, but also provide solid support for the efficient operation of equipment. In electric The sub-control field shows a practical value that cannot be ignored.

  • What Makes ACDC Constant Current Chips the Core of Modern Power Efficiency?

    In the modern era of electronics, ACDC Constant Current Chips have become indispensable in powering devices that demand stable and efficient energy conversion. These chips act as the essential link between alternating current (AC) input and direct current (DC) output, ensuring that electronic devices receive a constant, regulated current supply regardless of voltage fluctuations. This feature is crucial for maintaining performance stability and extending the lifespan of devices such as LED lighting, power adapters, battery chargers, industrial control systems, and communication equipment.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept