China KP107BQWPA Manufacturer, Supplier, Factory
Our company insists all along the quality policy of "product good quality is base of enterprise survival; buyer fulfillment will be the staring point and ending of an company; persistent improvement is eternal pursuit of staff" and also the consistent purpose of "reputation very first, shopper first" for KP107BQWPA,KP107CQWPA,KP107AQWAP,Rectifier Bridge Integrated Buck LED Power Switch with External OTP Chip, We glance ahead to receiving your enquires quickly and hope to have the chance to operate together with you inside the future. Welcome to just take a seem at our organization.
KP107BQWPA, We maintain long-term efforts and self-criticism, which helps us and improvement constantly. We strive to improve customer efficiency to save costs for customers. We do our best to improve the quality of product. We are going to not live up to the historic opportunity of the times.
Related Products
Hot Products
KP1402ASSGA
KP1402ASSGA is a 0-10V analog dimming signal to PWM digital signal chip. The chip can detect different dimming input signals (including 0/1-10V, 10-0/1V, 0/1-5V, 5-0/1V voltage dimming signals, PWM signals with 0-100% duty cycle, and simple resistance dimming signals), and convert the input signals into corresponding duty cycle PWM signals to adjust the output current of the LED driver.
KP28162SGA
KP28162SGA is a single-stage high PFC non isolated constant voltage BUCK power chip. The chip adopts a quasi resonant operating mode and adaptively adjusts the output voltage, which not only meets the voltage requirements of the later stage linear constant current, but also improves system efficiency.
AS1631
The AS1631 is a resonant switching power controller based on a half-bridge LLC resonant converter. The chip integrates high-voltage start, AC power failure detection and X capacitor discharge functions to meet the requirements of fast start and ultra-low standby.
KP3310
The KP3310 is an off-line linear regulator with a compact inductance free design. By adjusting the SEL pin resistance, the KP3310 can obtain a 5V/3.3V/2.7V three-gear output voltage.
NE1180
The NE1180 is a controller for continuous on-mode (CCM) power factor correction (PFC) step-up preconverters.
KP119X
KP119X is a family of highly integrated power switch with DCM (Discontinuous Conduction Mode) Primary Side Regulation (PSR) constant current (CC) control for high power isolated LED lighting applications.
- Related Blog
- Reviews
