English
Home > Products > Simplified 5V Auxiliary Power Supply Circuit

China Simplified 5V Auxiliary Power Supply Circuit Manufacturer, Supplier, Factory

Dedicated to strict high-quality management and considerate shopper company, our experienced team associates are normally available to discuss your requirements and ensure full shopper gratification for Simplified 5V Auxiliary Power Supply Circuit,Low-Cost Non-isolated BUCK Chip,AC220V to 5V Non-isolated Step-Down BUCK Chip, Our merchandise delight in excellent popularity among our buyers. We welcome consumers, business enterprise associations and good friends from all components with the globe to make contact with us and seek out cooperation for mutual rewards.
Simplified 5V Auxiliary Power Supply Circuit, Our professional engineering group will always be ready to serve you for consultation and feedback. We are able to also offer you with absolutely free samples to meet your requirements. Finest efforts will likely be produced to give you the ideal service and goods. For anyone who is thinking about our company and merchandise, please contact us by sending us emails or contact us quickly. As a way to know our merchandise and firm. lot more, you can come to our factory to find out it. We'll always welcome guests from all over the world to our business to build company relations with us. Please feel free to get in touch with us for business and we believe we are going to share the top trading practical experience with all our merchants.

Related Products

Hot Products

  • KP1402ASSGA

    KP1402ASSGA

    KP1402ASSGA is a 0-10V analog dimming signal to PWM digital signal chip. The chip can detect different dimming input signals (including 0/1-10V, 10-0/1V, 0/1-5V, 5-0/1V voltage dimming signals, PWM signals with 0-100% duty cycle, and simple resistance dimming signals), and convert the input signals into corresponding duty cycle PWM signals to adjust the output current of the LED driver.
  • KP28123SGA

    KP28123SGA

    KP28123SGA is a single-stage high PFC non isolated constant voltage BUCK power chip. The chip adopts a quasi resonant operating mode and adaptively adjusts the output voltage, which not only meets the voltage requirements of the later stage linear constant current, but also improves system efficiency.
  • KP2813ASGA

    KP2813ASGA

    KP2813ASGA is a high power factor, low total harmonic distortion, primary side control flyback constant voltage controller.
  • AS64194

    AS64194

    AS64194 is a step-down LED constant current power switch suitable for low voltage DC input, deep dimming, suitable for step-down high-power dimming LED driver applications with input 20V ~ 80V.
  • AS29011

    AS29011

    The AS29011 is a SOT89-5 package ultra-high voltage linear regulator capable of withstanding continuous DC or transient input voltages of up to 85V.
  • KP1313XDP

    KP1313XDP

    KP1313XDP is a high efficiency Quasi-Resonant (QR) mode Primary Side Regulation (PSR) LED power switch with high precision CC control ideal for high power LED lighting applications.
  • Related Blog
  • Reviews

  • PFC+LLC Composite controller.

    ​For high power density, high power output fast charge needs, Sillij launched a high-performance PFC+LLC combination controller SY5055, which sealed the front BOOST PFC and the rear LLC controller, making the peripheral circuit more concise, saving costs and also conducive to improving the power density of the entire power solution.

  • DBTR_2591A_01_REV1.0_2023-04-14

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • 50W High Performance LED Filament Lamp Driver with KP1352+GaN FET

    The demo board is designed to demonstrate a highperformance 50WLED filament lamp solution with a full input voltage range. The demonstration board is realized through a highly integrated high-frequency direct drive gallium nitride boost boost PFC constant current controller KP1352, with 650V power GaN FET.

  • The characteristics of ACDC Constant Current Chip

    An AC-DC Constant Current Chip is an integrated circuit designed to provide a stable current output while converting alternating current (AC) input to direct current (DC). These are commonly used in LED drivers and low-power lighting systems.

  • ​How Does Integrated EMI Filter in ACDC Constant Current Chip Simplify Power Supply Design?

    This technological leap demonstrates its advantages in wide-voltage scenarios. When the input voltage jumps from 90V to 264V, Huqin's ACDC chip can dynamically adjust the internal electromagnetic structure to keep the noise attenuation rate consistently above 42dB. However, when the voltage of a certain competing product's DCDC solution undergoes a sudden change, the filtering effect will decline by 15dB. This is like teaching the chip "metamorphosis". Test engineer Xiao Zhang pointed at the spectrum analyzer and said, "Our chip can reconstruct the electromagnetic topology in real time based on the interference frequency. This kind of intelligent response is something that discrete solutions can never catch up with."

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept