English
Home > Products > Rectifier Bridge Integrated LED Power Chip

China Rectifier Bridge Integrated LED Power Chip Manufacturer, Supplier, Factory

We depend on sturdy technical force and continually create sophisticated technologies to satisfy the demand of Rectifier Bridge Integrated LED Power Chip,KP10760WPA,KP10761BWPA,KP10762CWPA,DOB LED Power Chip, Our skilled complex workforce is going to be wholeheartedly at your assistance. We sincerely welcome you to definitely pay a visit to our site and firm and deliver us your inquiry.
Rectifier Bridge Integrated LED Power Chip, Although continuous opportunity, now we have now developed serious a friendly relationship with many oversea merchants, such as ones through Virginia. We securely assume that the merchandise regarding t shirt printer machine is often good through a great number of having its good quality and also cost.

Related Products

Hot Products

  • KP1315SPA

    KP1315SPA

    The KP1315SPA model supports PWM and 0-10V dimming isolation primary PSR constant current chips, with high dimming accuracy and depth, suitable for applications such as medium and high-power isolated lighting power supplies.
  • KP28162SGA

    KP28162SGA

    KP28162SGA is a single-stage high PFC non isolated constant voltage BUCK power chip. The chip adopts a quasi resonant operating mode and adaptively adjusts the output voltage, which not only meets the voltage requirements of the later stage linear constant current, but also improves system efficiency.
  • KP15052SPA

    KP15052SPA

    The KP15052SPA series is a high-performance, low-cost PWM controlled power switch for off-line low-power step-down applications with simple peripheral circuits and fewer components.
  • AS64194

    AS64194

    AS64194 is a step-down LED constant current power switch suitable for low voltage DC input, deep dimming, suitable for step-down high-power dimming LED driver applications with input 20V ~ 80V.
  • NDP23A5QB

    NDP23A5QB

    The NDP23A5QB is an efficient, single-chip synchronous buck DC/DC converter with a jitter frequency and average current mode control architecture.
  • KP1076X

    KP1076X

    KP1076X is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications without auxiliary winding.
  • Related Blog
  • Reviews

  • 500W, Single Stage LLC Power Supply Reference Design with KP2591(A)

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • DBTR_2591A_01_REV1.0_2023-04-14

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • 50W High Performance LED Filament Lamp Driver with KP1352+GaN FET

    The demo board is designed to demonstrate a highperformance 50WLED filament lamp solution with a full input voltage range. The demonstration board is realized through a highly integrated high-frequency direct drive gallium nitride boost boost PFC constant current controller KP1352, with 650V power GaN FET.

  • ​How Does Integrated EMI Filter in ACDC Constant Current Chip Simplify Power Supply Design?

    This technological leap demonstrates its advantages in wide-voltage scenarios. When the input voltage jumps from 90V to 264V, Huqin's ACDC chip can dynamically adjust the internal electromagnetic structure to keep the noise attenuation rate consistently above 42dB. However, when the voltage of a certain competing product's DCDC solution undergoes a sudden change, the filtering effect will decline by 15dB. This is like teaching the chip "metamorphosis". Test engineer Xiao Zhang pointed at the spectrum analyzer and said, "Our chip can reconstruct the electromagnetic topology in real time based on the interference frequency. This kind of intelligent response is something that discrete solutions can never catch up with."

  • ​KP86201: Empowering equipment operation with precise performance

    As a core component focusing on electronic control scenarios, KP86201's core advantages are reflected in control accuracy and operation stability. Adaptation compatibility and energy efficiency optimization are its key characteristics, which can not only meet the precise regulation needs under complex working conditions, but also provide solid support for the efficient operation of equipment. In electric The sub-control field shows a practical value that cannot be ignored.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept