English
Home > Products > Non-isolated Constant Current LED Driver Chip with PWM Dimming Function

China Non-isolated Constant Current LED Driver Chip with PWM Dimming Function Manufacturer, Supplier, Factory

In the past few years, our firm absorbed and digested highly developed technologies equally at home and abroad. Meanwhile, our business staffs a group of experts devoted on the growth of Non-isolated Constant Current LED Driver Chip with PWM Dimming Function,KP1463SPA, We warmly welcome all intrigued clients to call us for additional details.
Non-isolated Constant Current LED Driver Chip with PWM Dimming Function, We can meet the various needs of customers at home and abroad. We welcome new and old customers to come to consult & negotiate with us. Your satisfaction is our motivation! Let us work together to write a brilliant new chapter!

Related Products

Hot Products

  • KP116SPA

    KP116SPA

    KP116SPA is a highly integrated constant current LED controller, the chip adopts a quasi-resonant mode of operation, and the active power factor correction control technology can meet the requirements of high power factor, low harmonic distortion and high efficiency.
  • KP1325LGA

    KP1325LGA

    KP1325LGA is a highly integrated constant current LED power controller, the chip adopts the primary feedback quasi-resonant mode, and the active power factor correction control technology can meet the performance requirements of high power factor, low harmonic distortion and high efficiency.
  • KP28162SGA

    KP28162SGA

    KP28162SGA is a single-stage high PFC non isolated constant voltage BUCK power chip. The chip adopts a quasi resonant operating mode and adaptively adjusts the output voltage, which not only meets the voltage requirements of the later stage linear constant current, but also improves system efficiency.
  • AS2780

    AS2780

    The AS2780 is a constant voltage output controller with high power factor, low total harmonic distortion, and primary side control.
  • KP86201

    KP86201

    KP86201 is a single-phase induction motor controller based on the direct AC-to-AC converter (DAACTM) architecture, which can realize a single-phase AC motor stepless speed regulation solution with high power density, high efficiency, high power factor and low harmonics.
  • KP1075XWPA

    KP1075XWPA

    KP1075XWPA is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications without auxiliary winding.
  • Related Blog
  • Reviews

  • New grid drive series KP8530X for high reliability motor drive.

    Modern power electronics applications are based on the conversion technology of power devices, and all power devices require suitable gate drive solutions. As a bridge between...

  • Drain Sensing CrM Boost PFC 100W Demo Board with KP2801A

    This DEMO Board provides 100W CrM Boost PFC Solution. The controller KP2801A enables to drive without auxiliary winding ZCD sensing by Novel Drain sensing tech...

  • 500W, Single Stage LLC Power Supply Reference Design with KP2591(A)

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • DBTR_2591A_01_REV1.0_2023-04-14

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • ​How Does Integrated EMI Filter in ACDC Constant Current Chip Simplify Power Supply Design?

    This technological leap demonstrates its advantages in wide-voltage scenarios. When the input voltage jumps from 90V to 264V, Huqin's ACDC chip can dynamically adjust the internal electromagnetic structure to keep the noise attenuation rate consistently above 42dB. However, when the voltage of a certain competing product's DCDC solution undergoes a sudden change, the filtering effect will decline by 15dB. This is like teaching the chip "metamorphosis". Test engineer Xiao Zhang pointed at the spectrum analyzer and said, "Our chip can reconstruct the electromagnetic topology in real time based on the interference frequency. This kind of intelligent response is something that discrete solutions can never catch up with."

Related Search

High PFC Non-isolated Constant Current LED Driver Chip with PWM Dimming Function

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept