English
Home > Products > KP107CQWPA

China KP107CQWPA Manufacturer, Supplier, Factory

Our company puts emphasis about the administration, the introduction of talented staff, along with the construction of employees building, seeking hard to boost the standard and liability consciousness of staff members members. Our business successfully attained IS9001 Certification and European CE Certification of KP107CQWPA,KP107BQWPA,KP107AQWAP,Rectifier Bridge Integrated Buck LED Power Switch with External OTP Chip, Sincerely stay up for serving you from the in the vicinity of future. You are sincerely welcome to go to our company to talk company face to face with each other and create long-term co-operation with us!
KP107CQWPA, The best and original quality for spare parts is a most important factor for transportation. We may stick on supplying original and good quality parts even a little profit earned. God will bless us to do kindness business forever.

Related Products

Hot Products

  • KP14622SPA

    KP14622SPA

    KP14622SPA is a PF>0.9 high precision, dimming type LED constant current driver control chip. Non-isolated step-down LED constant current power supply for a full range of AC input voltages.
  • KP18058ESPA

    KP18058ESPA

    KP18058ESPA is a high-precision five channel all high voltage LED linear constant current dimming chip, which can be independently set with the I2C (Inter Integrated Circuit Bus) interface to adjust the size of five current channels and maintain various dimming modes.
  • KP28162SGA

    KP28162SGA

    KP28162SGA is a single-stage high PFC non isolated constant voltage BUCK power chip. The chip adopts a quasi resonant operating mode and adaptively adjusts the output voltage, which not only meets the voltage requirements of the later stage linear constant current, but also improves system efficiency.
  • AS6911SGA

    AS6911SGA

    AS6911SGA is a highly integrated step-down constant current LED driver for LED intelligent dimming applications.
  • KP1054AVPA

    KP1054AVPA

    KP1054AVPA is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications.
  • KP10760WPA

    KP10760WPA

    KP10760WPA combines a 500V power MOSFET, 600V FRD, 800V Rectifier Bridge and high voltage startup/IC supply circuit in one chip which reduced system design cost.
  • Related Blog
  • Reviews

  • The ultra-compact 40V series of buck converters are used in areas such as smart home appliances.

    With the improvement of consumers' quality of life, networked remote control makes smart home appliances with a "sense of science and technology" halo become a new generation...

  • DBTR_2591A_01_REV1.0_2023-04-14

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • High Performance 12V/4A Adapter Charger with Offline Current Mode Controller KP201 and Synchronous Rectifier KP40512

    KP201 is a high performance current mode PWM controller for offline flyback converter applications. The IC supports DCM and CCM operation mode.

  • Smart Meter | One-stop Chip Solution

    We provide diversified integrated chip solutions such as AC-DC, DC-DC, LDO and current limiting switch for smart meter applications to meet the high reliability and high performance requirements of meter applications.

  • The characteristics of ACDC Constant Current Chip

    An AC-DC Constant Current Chip is an integrated circuit designed to provide a stable current output while converting alternating current (AC) input to direct current (DC). These are commonly used in LED drivers and low-power lighting systems.

  • ​How Does Integrated EMI Filter in ACDC Constant Current Chip Simplify Power Supply Design?

    This technological leap demonstrates its advantages in wide-voltage scenarios. When the input voltage jumps from 90V to 264V, Huqin's ACDC chip can dynamically adjust the internal electromagnetic structure to keep the noise attenuation rate consistently above 42dB. However, when the voltage of a certain competing product's DCDC solution undergoes a sudden change, the filtering effect will decline by 15dB. This is like teaching the chip "metamorphosis". Test engineer Xiao Zhang pointed at the spectrum analyzer and said, "Our chip can reconstruct the electromagnetic topology in real time based on the interference frequency. This kind of intelligent response is something that discrete solutions can never catch up with."

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept