English
Home > Products > KP1079AWPA

China KP1079AWPA Manufacturer, Supplier, Factory

Bear "Customer 1st, Good quality first" in mind, we work closely with our prospects and supply them with efficient and professional services for KP1079AWPA,KP10790WAP,KP10791WAP,KP10792WAP,Rectifier Bridge Integrated Buck LED Power Chip, should you might have any query or wish to place an initial get be sure to usually do not wait to get hold of us.
KP1079AWPA, We hope we can establish long-term cooperation with all of the customers. And hope we can improve competitiveness and achieve the win-win situation together with the customers. We sincerely welcome the customers from all over the world to contact us for anything you need to have!

Related Products

Hot Products

  • KP18058ESPA

    KP18058ESPA

    KP18058ESPA is a high-precision five channel all high voltage LED linear constant current dimming chip, which can be independently set with the I2C (Inter Integrated Circuit Bus) interface to adjust the size of five current channels and maintain various dimming modes.
  • KP28163SGA

    KP28163SGA

    KP28163SGA is a single-stage high PFC non isolated buck constant voltage chip. The chip adopts a quasi resonant operating mode and adaptively adjusts the output voltage, which not only meets the voltage requirements of the later stage linear constant current, but also improves system efficiency.
  • KP311ALGA

    KP311ALGA

    The KP311ALGA is a non-isolated, highly integrated, and low-cost PWM power switch for step-down and step-down circuits.
  • AS1631

    AS1631

    The AS1631 is a resonant switching power controller based on a half-bridge LLC resonant converter. The chip integrates high-voltage start, AC power failure detection and X capacitor discharge functions to meet the requirements of fast start and ultra-low standby.
  • AS8301

    AS8301

    The AS8301 is a micropower isolated flyback switching power supply chip. No third party windings and optical couplings are required, and the output voltage is controlled by the primary voltage feedback.
  • KP107XLSPA

    KP107XLSPA

    KP107XLSPA is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications without auxiliary winding.
  • Related Blog
  • Reviews

  • PFC+LLC Composite controller.

    ​For high power density, high power output fast charge needs, Sillij launched a high-performance PFC+LLC combination controller SY5055, which sealed the front BOOST PFC and the rear LLC controller, making the peripheral circuit more concise, saving costs and also conducive to improving the power density of the entire power solution.

  • Drain Sensing CrM Boost PFC 100W Demo Board with KP2801A

    This DEMO Board provides 100W CrM Boost PFC Solution. The controller KP2801A enables to drive without auxiliary winding ZCD sensing by Novel Drain sensing tech...

  • 500W, Single Stage LLC Power Supply Reference Design with KP2591(A)

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • ​KP86201: Empowering equipment operation with precise performance

    As a core component focusing on electronic control scenarios, KP86201's core advantages are reflected in control accuracy and operation stability. Adaptation compatibility and energy efficiency optimization are its key characteristics, which can not only meet the precise regulation needs under complex working conditions, but also provide solid support for the efficient operation of equipment. In electric The sub-control field shows a practical value that cannot be ignored.

  • What Makes ACDC Constant Current Chips the Core of Modern Power Efficiency?

    In the modern era of electronics, ACDC Constant Current Chips have become indispensable in powering devices that demand stable and efficient energy conversion. These chips act as the essential link between alternating current (AC) input and direct current (DC) output, ensuring that electronic devices receive a constant, regulated current supply regardless of voltage fluctuations. This feature is crucial for maintaining performance stability and extending the lifespan of devices such as LED lighting, power adapters, battery chargers, industrial control systems, and communication equipment.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept