English
Home > Products > High-Efficiency SSR Power Supply Chip

China High-Efficiency SSR Power Supply Chip Manufacturer, Supplier, Factory

We've got a specialist, effectiveness staff to supply high quality service for our shopper. We always follow the tenet of customer-oriented, details-focused for High-Efficiency SSR Power Supply Chip,KP201LGA,SSR Chip with Constant Current/Constant Voltage Function,High-Power SSR Power Supply Chip, We are generally looking ahead to forming effective business associations with new clientele around the world.
High-Efficiency SSR Power Supply Chip, During the short years, we serve our clients honestly as Quality First, Integrity Prime, Delivery Timely, which has earned us an outstanding reputation and an impressive client care portfolio. Looking forward to working with you Now!

Related Products

Hot Products

  • KP28123SGA

    KP28123SGA

    KP28123SGA is a single-stage high PFC non isolated constant voltage BUCK power chip. The chip adopts a quasi resonant operating mode and adaptively adjusts the output voltage, which not only meets the voltage requirements of the later stage linear constant current, but also improves system efficiency.
  • CW1131

    CW1131

    CW1131 is a SOT23-3 packaged three pin non isolated BUCK fixed 5V output power chip, high integration and low-cost PWM power switch, suitable for buck and buck circuits.
  • AS68032

    AS68032

    AS68032 is a high-precision 3-route LED modulation drive, which can independently set the PWM signal duty ratio of 3 channels through 3 PWM interfaces to achieve the dimming and color adjustment function.
  • KP107XLSPA

    KP107XLSPA

    KP107XLSPA is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications without auxiliary winding.
  • KP1070QWPA

    KP1070QWPA

    KP1070QWPA is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications without auxiliary winding.
  • KP119X

    KP119X

    KP119X is a family of highly integrated power switch with DCM (Discontinuous Conduction Mode) Primary Side Regulation (PSR) constant current (CC) control for high power isolated LED lighting applications.
  • Related Blog
  • Reviews

  • PFC+LLC Composite controller.

    ​For high power density, high power output fast charge needs, Sillij launched a high-performance PFC+LLC combination controller SY5055, which sealed the front BOOST PFC and the rear LLC controller, making the peripheral circuit more concise, saving costs and also conducive to improving the power density of the entire power solution.

  • 500W, Single Stage LLC Power Supply Reference Design with KP2591(A)

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • DBTR_2591A_01_REV1.0_2023-04-14

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • 50W High Performance LED Filament Lamp Driver with KP1352+GaN FET

    The demo board is designed to demonstrate a highperformance 50WLED filament lamp solution with a full input voltage range. The demonstration board is realized through a highly integrated high-frequency direct drive gallium nitride boost boost PFC constant current controller KP1352, with 650V power GaN FET.

  • The characteristics of ACDC Constant Current Chip

    An AC-DC Constant Current Chip is an integrated circuit designed to provide a stable current output while converting alternating current (AC) input to direct current (DC). These are commonly used in LED drivers and low-power lighting systems.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept