English
Home > Products > Single-Stage PFC Isolated Constant Current LED Driver Chip

China Single-Stage PFC Isolated Constant Current LED Driver Chip Manufacturer, Supplier, Factory

The client satisfaction is our primary concentrate on. We uphold a consistent level of professionalism, top quality, credibility and service for Single-Stage PFC Isolated Constant Current LED Driver Chip,KP1325LGA, To significantly improve our assistance quality, our company imports a large number of international advanced devices. Welcome clients from your home and abroad to simply call and inquire!
Single-Stage PFC Isolated Constant Current LED Driver Chip, Profession, Devoting are always fundamental to our mission. We now have always been in line with serving customers, creating value management objectives and adhering to the sincerity, dedication, persistent management idea.

Related Products

Hot Products

  • KP28162SGA

    KP28162SGA

    KP28162SGA is a single-stage high PFC non isolated constant voltage BUCK power chip. The chip adopts a quasi resonant operating mode and adaptively adjusts the output voltage, which not only meets the voltage requirements of the later stage linear constant current, but also improves system efficiency.
  • KP3111LGA

    KP3111LGA

    The KP3111LGA is a non-isolated, highly integrated, and low-cost PWM power switch for step-down and step-down circuits.
  • KP15051SPA

    KP15051SPA

    The KP15051SPA series is a high-performance, low-cost PWM controlled power switch for off-line low-power step-down applications with simple peripheral circuits and fewer components.
  • KP3310

    KP3310

    The KP3310 is an off-line linear regulator with a compact inductance free design. By adjusting the SEL pin resistance, the KP3310 can obtain a 5V/3.3V/2.7V three-gear output voltage.
  • AS64194

    AS64194

    AS64194 is a step-down LED constant current power switch suitable for low voltage DC input, deep dimming, suitable for step-down high-power dimming LED driver applications with input 20V ~ 80V.
  • KP107XQ

    KP107XQ

    KP107XQ is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications without auxiliary winding.
  • Related Blog
  • Reviews

  • The ultra-compact 40V series of buck converters are used in areas such as smart home appliances.

    With the improvement of consumers' quality of life, networked remote control makes smart home appliances with a "sense of science and technology" halo become a new generation...

  • 500W, Single Stage LLC Power Supply Reference Design with KP2591(A)

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • DBTR_2591A_01_REV1.0_2023-04-14

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 50W High Performance LED Filament Lamp Driver with KP1352+GaN FET

    The demo board is designed to demonstrate a highperformance 50WLED filament lamp solution with a full input voltage range. The demonstration board is realized through a highly integrated high-frequency direct drive gallium nitride boost boost PFC constant current controller KP1352, with 650V power GaN FET.

  • The advantages of DCDC Constant Current Chip

    DC-DC constant current chips have been in high demand in recent times, owing to their numerous benefits. These embedded systems are well-equipped to handle a wide range of applications, such as automotive, IoT, medical devices, and telecommunications. In this article, we will discuss some of the significant advantages of DC-DC constant current chips.

  • ​How Does Integrated EMI Filter in ACDC Constant Current Chip Simplify Power Supply Design?

    This technological leap demonstrates its advantages in wide-voltage scenarios. When the input voltage jumps from 90V to 264V, Huqin's ACDC chip can dynamically adjust the internal electromagnetic structure to keep the noise attenuation rate consistently above 42dB. However, when the voltage of a certain competing product's DCDC solution undergoes a sudden change, the filtering effect will decline by 15dB. This is like teaching the chip "metamorphosis". Test engineer Xiao Zhang pointed at the spectrum analyzer and said, "Our chip can reconstruct the electromagnetic topology in real time based on the interference frequency. This kind of intelligent response is something that discrete solutions can never catch up with."

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept