English
Home > Products > High-Power Active Boost PFC Chip

China High-Power Active Boost PFC Chip Manufacturer, Supplier, Factory

We insist over the principle of enhancement of 'High high quality, Efficiency, Sincerity and Down-to-earth working approach' to offer you with superb assistance of processing for High-Power Active Boost PFC Chip,Active Boost PFC Chip Supporting CCM Mode,Replacement for NCP1654 Chip, We're incredibly proud with the excellent name from our shoppers for our products' trustworthy quality.
High-Power Active Boost PFC Chip, We have been consistently broadening the market within Romania in addition to preparation punching in extra premium quality merchandise connected with printer on t shirt so that you can Romania. Most people firmly believe we have the whole capacity to provide you happy solutions.

Related Products

Hot Products

  • KP1325LGA

    KP1325LGA

    KP1325LGA is a highly integrated constant current LED power controller, the chip adopts the primary feedback quasi-resonant mode, and the active power factor correction control technology can meet the performance requirements of high power factor, low harmonic distortion and high efficiency.
  • KP18058ESPA

    KP18058ESPA

    KP18058ESPA is a high-precision five channel all high voltage LED linear constant current dimming chip, which can be independently set with the I2C (Inter Integrated Circuit Bus) interface to adjust the size of five current channels and maintain various dimming modes.
  • AS2780

    AS2780

    The AS2780 is a constant voltage output controller with high power factor, low total harmonic distortion, and primary side control.
  • AS68032

    AS68032

    AS68032 is a high-precision 3-route LED modulation drive, which can independently set the PWM signal duty ratio of 3 channels through 3 PWM interfaces to achieve the dimming and color adjustment function.
  • KP1076X

    KP1076X

    KP1076X is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications without auxiliary winding.
  • KP10760WPA

    KP10760WPA

    KP10760WPA combines a 500V power MOSFET, 600V FRD, 800V Rectifier Bridge and high voltage startup/IC supply circuit in one chip which reduced system design cost.
  • Related Blog
  • Reviews

  • New grid drive series KP8530X for high reliability motor drive.

    Modern power electronics applications are based on the conversion technology of power devices, and all power devices require suitable gate drive solutions. As a bridge between...

  • The ultra-compact 40V series of buck converters are used in areas such as smart home appliances.

    With the improvement of consumers' quality of life, networked remote control makes smart home appliances with a "sense of science and technology" halo become a new generation...

  • DBTR_2591A_01_REV1.0_2023-04-14

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • The characteristics of ACDC Constant Current Chip

    An AC-DC Constant Current Chip is an integrated circuit designed to provide a stable current output while converting alternating current (AC) input to direct current (DC). These are commonly used in LED drivers and low-power lighting systems.

  • ​KP86201: Empowering equipment operation with precise performance

    As a core component focusing on electronic control scenarios, KP86201's core advantages are reflected in control accuracy and operation stability. Adaptation compatibility and energy efficiency optimization are its key characteristics, which can not only meet the precise regulation needs under complex working conditions, but also provide solid support for the efficient operation of equipment. In electric The sub-control field shows a practical value that cannot be ignored.

  • What Makes ACDC Constant Current Chips the Core of Modern Power Efficiency?

    In the modern era of electronics, ACDC Constant Current Chips have become indispensable in powering devices that demand stable and efficient energy conversion. These chips act as the essential link between alternating current (AC) input and direct current (DC) output, ensuring that electronic devices receive a constant, regulated current supply regardless of voltage fluctuations. This feature is crucial for maintaining performance stability and extending the lifespan of devices such as LED lighting, power adapters, battery chargers, industrial control systems, and communication equipment.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept