English
Home > Products > KP311ALGA

China KP311ALGA Manufacturer, Supplier, Factory

We emphasize advancement and introduce new products into the market each year for KP311ALGA,Simplified 5V Auxiliary Power Supply Circuit,Non-isolated BUCK Chip,AC220V to 5V Non-isolated Step-Down BUCK Chip, Good quality, timely service and Competitive price, all win us a good fame in xxx field despite the international intense competition.
KP311ALGA, We attained ISO9001 which provides solid foundation for our further development. Persisting in "High quality, Prompt Delivery, Competitive Price", now we have established long-term cooperation with clients from both overseas and domestically and get new and old clients' high comments. It is our great honor to meet your demands. We have been sincerely expecting your attention.

Related Products

Hot Products

  • KP116SPA

    KP116SPA

    KP116SPA is a highly integrated constant current LED controller, the chip adopts a quasi-resonant mode of operation, and the active power factor correction control technology can meet the requirements of high power factor, low harmonic distortion and high efficiency.
  • KP1313SPA

    KP1313SPA

    KP1313SPA is a high-performance quasi-resonant, primary control LED controller that provides high precision constant current output performance, especially suitable for medium and high power isolated lighting power supply.
  • KP1463SPA

    KP1463SPA

    KP1463SPA is a high precision, dimming LED constant current controller suitable for non-isolated step-down LED constant current power supply with a full range of AC input voltage.
  • KP14622SPA

    KP14622SPA

    KP14622SPA is a PF>0.9 high precision, dimming type LED constant current driver control chip. Non-isolated step-down LED constant current power supply for a full range of AC input voltages.
  • KP18062ESPA

    KP18062ESPA

    KP18062ESPA is a dual channel LED linear constant current driver chip that can meet the requirements of the 1EC-61000-3-2: 2018 specification. The chip adopts linear constant current technology, which does not require magnetic components and can save system costs.
  • KP3310

    KP3310

    The KP3310 is an off-line linear regulator with a compact inductance free design. By adjusting the SEL pin resistance, the KP3310 can obtain a 5V/3.3V/2.7V three-gear output voltage.
  • Related Blog
  • Reviews

  • PFC+LLC Composite controller.

    ​For high power density, high power output fast charge needs, Sillij launched a high-performance PFC+LLC combination controller SY5055, which sealed the front BOOST PFC and the rear LLC controller, making the peripheral circuit more concise, saving costs and also conducive to improving the power density of the entire power solution.

  • The ultra-compact 40V series of buck converters are used in areas such as smart home appliances.

    With the improvement of consumers' quality of life, networked remote control makes smart home appliances with a "sense of science and technology" halo become a new generation...

  • DBTR_2591A_01_REV1.0_2023-04-14

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • 50W High Performance LED Filament Lamp Driver with KP1352+GaN FET

    The demo board is designed to demonstrate a highperformance 50WLED filament lamp solution with a full input voltage range. The demonstration board is realized through a highly integrated high-frequency direct drive gallium nitride boost boost PFC constant current controller KP1352, with 650V power GaN FET.

  • The characteristics of ACDC Constant Current Chip

    An AC-DC Constant Current Chip is an integrated circuit designed to provide a stable current output while converting alternating current (AC) input to direct current (DC). These are commonly used in LED drivers and low-power lighting systems.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept