English
Home > Products > KP1070QSPA

China KP1070QSPA Manufacturer, Supplier, Factory

That has a positive and progressive attitude to customer's fascination, our enterprise constantly improves our merchandise high quality to meet the demands of customers and further focuses on safety, reliability, environmental requirements, and innovation of KP1070QSPA,KP107AQSPA,KP1071QSPA,KP1072QSPA,KP1073QSPA, Through our hard work, we have always been on the forefront of clean technology product innovation. We are a green partner you can rely on. Contact us today for more information!
KP1070QSPA, We strongly believe that technology and service is our base today and quality will create our reliable walls of future. Only we've better and better quality , could we achieve our customers and ourselves, too. Welcome customers all over the word to contact us for getting further business and reliable relationships. We have been always here working for your demands whenever you want.

Related Products

Hot Products

  • AS8211HV

    AS8211HV

    The AS8211HV is a high-performance, low-cost PWM controlled power switch suitable for off-line low-power step-down applications with simple peripheral circuits and fewer devices.
  • KP18058ESPA

    KP18058ESPA

    KP18058ESPA is a high-precision five channel all high voltage LED linear constant current dimming chip, which can be independently set with the I2C (Inter Integrated Circuit Bus) interface to adjust the size of five current channels and maintain various dimming modes.
  • KP18108ESPA

    KP18108ESPA

    KP18108ESPA is a high PF, high-efficiency linear constant current LED driver chip that uses linear constant current technology to accurately set the LED string current through external resistors.
  • AS6A31N

    AS6A31N

    The AS6A31N is a two-phase Interleaved, critical on-mode Boost (CRM Boost) constant voltage power factor correction (PFC) controller.
  • KP119X

    KP119X

    KP119X is a family of highly integrated power switch with DCM (Discontinuous Conduction Mode) Primary Side Regulation (PSR) constant current (CC) control for high power isolated LED lighting applications.
  • NE1189

    NE1189

    The NE1189 is a dual-channel synchronous rectifier (SR) controller IC high performance system.
  • Related Blog
  • Reviews

  • The advantages of DCDC Constant Current Chip

    DC-DC constant current chips have been in high demand in recent times, owing to their numerous benefits. These embedded systems are well-equipped to handle a wide range of applications, such as automotive, IoT, medical devices, and telecommunications. In this article, we will discuss some of the significant advantages of DC-DC constant current chips.

  • ​KP86201: Empowering equipment operation with precise performance

    As a core component focusing on electronic control scenarios, KP86201's core advantages are reflected in control accuracy and operation stability. Adaptation compatibility and energy efficiency optimization are its key characteristics, which can not only meet the precise regulation needs under complex working conditions, but also provide solid support for the efficient operation of equipment. In electric The sub-control field shows a practical value that cannot be ignored.

  • Drain Sensing CrM Boost PFC 100W Demo Board with KP2801A

    This DEMO Board provides 100W CrM Boost PFC Solution. The controller KP2801A enables to drive without auxiliary winding ZCD sensing by Novel Drain sensing tech...

  • New grid drive series KP8530X for high reliability motor drive.

    Modern power electronics applications are based on the conversion technology of power devices, and all power devices require suitable gate drive solutions. As a bridge between...

  • The ultra-compact 40V series of buck converters are used in areas such as smart home appliances.

    With the improvement of consumers' quality of life, networked remote control makes smart home appliances with a "sense of science and technology" halo become a new generation...

  • PFC+LLC Composite controller.

    ​For high power density, high power output fast charge needs, Sillij launched a high-performance PFC+LLC combination controller SY5055, which sealed the front BOOST PFC and the rear LLC controller, making the peripheral circuit more concise, saving costs and also conducive to improving the power density of the entire power solution.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept