English
Home > Products > 0-10V Dimming Chip

China 0-10V Dimming Chip Manufacturer, Supplier, Factory

The key to our success is "Good Solution Top quality, Reasonable Value and Efficient Service" for 0-10V Dimming Chip,KP1315SPA,Isolated Constant Current LED Driver Chip with PWM Dimming Function, Seeing believes! We sincerely welcome the new clients overseas to setup business enterprise interactions and also be expecting to consolidate the relationships while using the long-established prospects.
0-10V Dimming Chip, With the goal of "zero defect". To care for the environment, and social returns, care employee social responsibility as own duty. We welcome friends from all over the world to visit and guide us so that we can achieve the win-win goal together.

Related Products

Hot Products

  • KP18058ESPA

    KP18058ESPA

    KP18058ESPA is a high-precision five channel all high voltage LED linear constant current dimming chip, which can be independently set with the I2C (Inter Integrated Circuit Bus) interface to adjust the size of five current channels and maintain various dimming modes.
  • KP18062ESPA

    KP18062ESPA

    KP18062ESPA is a dual channel LED linear constant current driver chip that can meet the requirements of the 1EC-61000-3-2: 2018 specification. The chip adopts linear constant current technology, which does not require magnetic components and can save system costs.
  • KP18068ESPA

    KP18068ESPA

    KP18068ESPA is a high-precision five channel high voltage LED linear constant current dimming chip, which can be independently set with the I2C (Inter-Integrated-Circuit Bus) interface to adjust the size of five current channels and maintain various dimming modes.
  • AS29011

    AS29011

    The AS29011 is a SOT89-5 package ultra-high voltage linear regulator capable of withstanding continuous DC or transient input voltages of up to 85V.
  • NDP23A5QB

    NDP23A5QB

    The NDP23A5QB is an efficient, single-chip synchronous buck DC/DC converter with a jitter frequency and average current mode control architecture.
  • KP1313XDP

    KP1313XDP

    KP1313XDP is a high efficiency Quasi-Resonant (QR) mode Primary Side Regulation (PSR) LED power switch with high precision CC control ideal for high power LED lighting applications.
  • Related Blog
  • Reviews

  • The ultra-compact 40V series of buck converters are used in areas such as smart home appliances.

    With the improvement of consumers' quality of life, networked remote control makes smart home appliances with a "sense of science and technology" halo become a new generation...

  • DBTR_2591A_01_REV1.0_2023-04-14

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • 50W High Performance LED Filament Lamp Driver with KP1352+GaN FET

    The demo board is designed to demonstrate a highperformance 50WLED filament lamp solution with a full input voltage range. The demonstration board is realized through a highly integrated high-frequency direct drive gallium nitride boost boost PFC constant current controller KP1352, with 650V power GaN FET.

  • ​KP86201: Empowering equipment operation with precise performance

    As a core component focusing on electronic control scenarios, KP86201's core advantages are reflected in control accuracy and operation stability. Adaptation compatibility and energy efficiency optimization are its key characteristics, which can not only meet the precise regulation needs under complex working conditions, but also provide solid support for the efficient operation of equipment. In electric The sub-control field shows a practical value that cannot be ignored.

  • What Makes ACDC Constant Current Chips the Core of Modern Power Efficiency?

    In the modern era of electronics, ACDC Constant Current Chips have become indispensable in powering devices that demand stable and efficient energy conversion. These chips act as the essential link between alternating current (AC) input and direct current (DC) output, ensuring that electronic devices receive a constant, regulated current supply regardless of voltage fluctuations. This feature is crucial for maintaining performance stability and extending the lifespan of devices such as LED lighting, power adapters, battery chargers, industrial control systems, and communication equipment.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept