English
Home > Products > Replacement for NCP1654 Chip

China Replacement for NCP1654 Chip Manufacturer, Supplier, Factory

keep on to improve, to make sure solution good quality in line with market and shopper standard requirements. Our business has a top quality assurance program are actually established for Replacement for NCP1654 Chip,Active Boost PFC Chip Supporting CCM Mode,High-Power Active Boost PFC Chip, We welcome new and aged consumers to speak to us by telephone or send out us inquiries by mail for long term company associations and attaining mutual results.
Replacement for NCP1654 Chip, If any item be of curiosity to you, make sure you allow us to know. We will try our best to satisfy your requirements with high quality products and solutions, the best prices and prompt delivery. Be sure to feel free to contact us at any time. We'll reply you when we receive your inquiries. You should note that samples are available before we start our business.

Related Products

Hot Products

  • KP311ALGA

    KP311ALGA

    The KP311ALGA is a non-isolated, highly integrated, and low-cost PWM power switch for step-down and step-down circuits.
  • KP1511SPA

    KP1511SPA

    KP1511SPA is a highly integrated step-up PFC constant voltage controller, the chip adopts a quasi-resonant mode of operation, coupled with active power factor correction control technology to meet the requirements of high power factor, ultra-low harmonic distortion and high efficiency.
  • KP2813ASGA

    KP2813ASGA

    KP2813ASGA is a high power factor, low total harmonic distortion, primary side control flyback constant voltage controller.
  • CW1131

    CW1131

    CW1131 is a SOT23-3 packaged three pin non isolated BUCK fixed 5V output power chip, high integration and low-cost PWM power switch, suitable for buck and buck circuits.
  • NDP23A5QB

    NDP23A5QB

    The NDP23A5QB is an efficient, single-chip synchronous buck DC/DC converter with a jitter frequency and average current mode control architecture.
  • KP86201

    KP86201

    KP86201 is a single-phase induction motor controller based on the direct AC-to-AC converter (DAACTM) architecture, which can realize a single-phase AC motor stepless speed regulation solution with high power density, high efficiency, high power factor and low harmonics.
  • Related Blog
  • Reviews

  • Drain Sensing CrM Boost PFC 100W Demo Board with KP2801A

    This DEMO Board provides 100W CrM Boost PFC Solution. The controller KP2801A enables to drive without auxiliary winding ZCD sensing by Novel Drain sensing tech...

  • 500W, Single Stage LLC Power Supply Reference Design with KP2591(A)

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 50W High Performance LED Filament Lamp Driver with KP1352+GaN FET

    The demo board is designed to demonstrate a highperformance 50WLED filament lamp solution with a full input voltage range. The demonstration board is realized through a highly integrated high-frequency direct drive gallium nitride boost boost PFC constant current controller KP1352, with 650V power GaN FET.

  • High Performance 12V/4A Adapter Charger with Offline Current Mode Controller KP201 and Synchronous Rectifier KP40512

    KP201 is a high performance current mode PWM controller for offline flyback converter applications. The IC supports DCM and CCM operation mode.

  • The advantages of DCDC Constant Current Chip

    DC-DC constant current chips have been in high demand in recent times, owing to their numerous benefits. These embedded systems are well-equipped to handle a wide range of applications, such as automotive, IoT, medical devices, and telecommunications. In this article, we will discuss some of the significant advantages of DC-DC constant current chips.

  • How Does a DCDC Constant Current Chip Work in High-Precision Power Regulation?

    A DCDC Constant Current Chip is a core component in modern power management systems, designed to deliver a stable and controllable output current regardless of load or input voltage variations. This article provides a comprehensive technical overview of how DCDC Constant Current Chips function, examines key electrical parameters, explores real-world application scenarios, and answers frequently asked technical questions. The content is structured to support engineering decision-making, component selection, and long-term system optimization while aligning with current search behavior and professional reading habits.

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept