English
Home > Products > 100V Isolated High-Power DCDC Converter

China 100V Isolated High-Power DCDC Converter Manufacturer, Supplier, Factory

Gaining purchaser gratification is our firm's intention eternally. We will make wonderful endeavours to build new and top-quality merchandise, satisfy your exclusive needs and provide you with pre-sale, on-sale and after-sale products and services for 100V Isolated High-Power DCDC Converter, Our final goal is "To try the best, To be the Best". Please feel free to contact with us if you have any requirements.
100V Isolated High-Power DCDC Converter, Our company offers the full range from pre-sales to after-sales service, from product development to audit the use of maintenance, based on strong technical strength, superior product performance, reasonable prices and perfect service, we will continue to develop, to provide the high-quality products and services, and promote lasting cooperation with our customers, common development and create a better future.

Related Products

Hot Products

  • KP106SPA

    KP106SPA

    KP106SPA is a highly integrated constant current LED controller, the chip adopts a quasi-resonant mode of operation, while using active power factor correction control technology to meet the requirements of high power factor, low harmonic distortion and high efficiency.
  • KP1315SPA

    KP1315SPA

    The KP1315SPA model supports PWM and 0-10V dimming isolation primary PSR constant current chips, with high dimming accuracy and depth, suitable for applications such as medium and high-power isolated lighting power supplies.
  • NE1180

    NE1180

    The NE1180 is a controller for continuous on-mode (CCM) power factor correction (PFC) step-up preconverters.
  • KP86201

    KP86201

    KP86201 is a single-phase induction motor controller based on the direct AC-to-AC converter (DAACTM) architecture, which can realize a single-phase AC motor stepless speed regulation solution with high power density, high efficiency, high power factor and low harmonics.
  • KP1070QWPA

    KP1070QWPA

    KP1070QWPA is a highly integrated power switch with Quasi-Resonant Buck (QR-Buck) constant current (CC) control for LED lighting applications without auxiliary winding.
  • KP10760WPA

    KP10760WPA

    KP10760WPA combines a 500V power MOSFET, 600V FRD, 800V Rectifier Bridge and high voltage startup/IC supply circuit in one chip which reduced system design cost.
  • Related Blog
  • Reviews

  • The ultra-compact 40V series of buck converters are used in areas such as smart home appliances.

    With the improvement of consumers' quality of life, networked remote control makes smart home appliances with a "sense of science and technology" halo become a new generation...

  • DBTR_2591A_01_REV1.0_2023-04-14

    The KP2591(A) is a resonant switching power controller based on half-bridge LLC resonant converter, which integrates half-bridge driver with 50% duty cycle, and the maximum operating frequency is up to 350kHz.

  • 600W Non-isolated PWM Dimming LED Driver with KP1469

    This DEMO board is a high performance nonisolated 600W constant current LED driver which is controlled by KP1469.Besides the multi-protection function (OVP, SCP, OTP), this demo also has very good efficiency, load regulation, low standby power loss and wide dimming range.

  • High Performance 12V/4A Adapter Charger with Offline Current Mode Controller KP201 and Synchronous Rectifier KP40512

    KP201 is a high performance current mode PWM controller for offline flyback converter applications. The IC supports DCM and CCM operation mode.

  • Smart Meter | One-stop Chip Solution

    We provide diversified integrated chip solutions such as AC-DC, DC-DC, LDO and current limiting switch for smart meter applications to meet the high reliability and high performance requirements of meter applications.

  • ​How Does Integrated EMI Filter in ACDC Constant Current Chip Simplify Power Supply Design?

    This technological leap demonstrates its advantages in wide-voltage scenarios. When the input voltage jumps from 90V to 264V, Huqin's ACDC chip can dynamically adjust the internal electromagnetic structure to keep the noise attenuation rate consistently above 42dB. However, when the voltage of a certain competing product's DCDC solution undergoes a sudden change, the filtering effect will decline by 15dB. This is like teaching the chip "metamorphosis". Test engineer Xiao Zhang pointed at the spectrum analyzer and said, "Our chip can reconstruct the electromagnetic topology in real time based on the interference frequency. This kind of intelligent response is something that discrete solutions can never catch up with."

Send Inquiry

Hit enter to search or ESC to close
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept